Skip to content
FREE SHIPPING ON ALL ORDERS
FREE SHIPPING ON ALL ORDERS
NDS 3 Inch Pro Series Channel™ Drain System

NDS 3 Inch Pro Series Channel™ Drain System

3 in. Pro Series Channel™ Drain Grate, 3-7/8 in. X 19-11/16 in. long, Light Gray Plastic

$27.65


FREE SHIPPING
SKU 714

Keep your channel drain system running as efficiently as possible with a channel drain grate in place. The 3 in. Pro Series™ Channel Drain Grate blocks leaves and debris from entering and potentially clogging your drainage system and works with the 3 in. Pro Series Channel Drain to drain moderate flows from driveways, patios, courtyards, and walkways. The drain grate, or drain cover, is made of gray polyethylene and has an open surface area of 23.6 sq. in./ft. and 72 GPM/ft. flow rate.

 

System Selection:

  • Scroll down to select your system components. Multiple channel units are connected together and then paired with accessories such as caps and grates. 

Note: NDS drainage products are subject to a $750 minimum order.


Please Use the Order Form Below to Order ▼

View Our Full Selection of NDS Channel Drain Products →

Ordering Info:

Please scroll down for the complete 3 in. Pro Series product listing with pricing. Not sure of the exact parts needed for your project? Please submit an NDS Channel / Trench Drain Quote Request >

Spec Sheets

Visit ndspro.com to download specification sheets and other technical information.

Shipping

  • All items ship for free (standard ground, see map)
  • Call: (800) 604-5537 for pricing and shipping questions. Shipping estimates shown on the map pertain to this specific product only.
  • Orders typically ship in 1-2 business days. Transit times displayed in the map are listed in business days, and are approximate. The day that the order is shipped is not counted as a transit day.
NDS-Transit-Map_6d8f0af4-e4db-4159-a7a4-4ca8b8ba8710.gif__PID:713ed80e-353f-4d48-9ae6-2b8b0e0a3d58

Channel Drain System & Accessories (Free Shipping)

Please see the below product listing. Please note, accessories (grates, clips, caps, etc.) must be purchased with a channel /  trench drain system including channels and cannot ship alone.

NDS 3 in. Pro Series Channel™ Drain System — High-Durability Guide, Install Steps & Case Study

Guide • NDS 3 in. Pro Series Channel™ Drain System

NDS 3 in. Pro Series Channel™ Drain: Sleek, Tough, and Built for Busy Hardscapes

The NDS 3 in. Pro Series Channel™ Drain System is engineered to stop standing water on driveways, paved patios, and walkways. Compact sections snap together for quick installs, while thick, UV-stable walls and reinforcing ribs deliver long-term durability—even where vehicle traffic is expected.

NDS 3 in. Pro Series Channel Drain installation at driveway apron
Pro Series Channel™ set at a driveway apron for continuous capture

Why Choose the 3 in. Pro Series? (Tech Explained Simply)

  • Compact & Modular: 3.28 ft sections snap together with interlocking joints; cut in 4 in increments for custom layouts.
  • Built-In Outlet: Bottom knock-out connects directly to 3 in sewer & drain pipe—no special adapters needed.
  • Extra Durable: Thick walls + reinforcing ribs resist impacts; UV-stable materials fight fading and cracking.
  • Anchored Installation: Channel-to-channel clips and rebar clips stabilize placement and help prevent float.
  • Vehicle-Capable Grates: Plastic grates withstand cars and light trucks at moderate speeds (≈up to ~175 psi).

Best-Fit Applications

  • Driveway Aprons: Intercept sheet flow before it reaches the garage threshold.
  • Paved Patios & Courtyards: Keep entertainment areas drier after storms or cleaning.
  • Walkways & Side Paths: Reduce slip hazards along narrow hardscape corridors.
  • Around Planters & Borders: Create discreet runs that blend with pavers and edging.

Layout & Sizing Tips (Step-by-Step)

  1. Map the flow path: Identify low edges (aprons, slab joints, door thresholds) where water collects.
  2. Plan discharge: Use the built-in bottom knock-out to connect to a 3 in pipe; route to a basin, dry well, or approved storm tie-in.
  3. Cut to length: Trim sections in 4 in increments for precise fit around columns and steps.
  4. Select grates: Match color/texture to your surface; confirm the vehicle-capable rating where needed.
  5. Stabilize the run: Use channel-to-channel and rebar clips to hold alignment before backfill.
Placing 3 in. Pro Series Channel Drain into prepared trench
Snap-together sections drop into a narrow prepared trench

Installation Overview (Pro-Friendly, DIY-Aware)

Plain English: Dig, set grade, snap sections, anchor, connect outlet, and finish flush to the surface.
  1. Excavate & Bed: Cut a narrow trench; compact base and add bedding per site conditions.
  2. Set Elevations: Establish a consistent fall toward your outlet for predictable drainage.
  3. Assemble Sections: Snap 3.28 ft modules together; cut as needed; use channel-to-channel clips for alignment.
  4. Anchor: Secure with rebar clips to prevent float when placing concrete or resetting pavers.
  5. Connect Outlet: Pop the bottom knock-out and solvent-weld to 3 in pipe; test flow; finish surface flush with grate height.

Case Study: Sloped Driveway That Finally Stays Dry

Site: Brick driveway with mild crown • Problem: Stormwater ran toward the garage, pooling at the threshold and leaving tire-track stains.

Solution: A 26 ft run of NDS 3 in. Pro Series Channel™ was installed across the apron. Sections were trimmed in 4 in increments to weave around stone columns. The built-in bottom outlet tied into a 3 in drain line routed to a dry well. Vehicle-rated plastic grates matched the brick tone.

  • Install window: One day (two-person crew) including saw-cutting and cleanup.
  • Outcome: No pooling during subsequent 1"+ storms; garage threshold remained dry.
  • Maintenance: Quick quarterly rinse; grates lift for easy debris removal.

Maintenance & Care

  • Seasonal checks: Inspect after major storms and each season for leaves/sediment.
  • Easy cleaning: Lift grates; hose out channels; use a nylon brush for stubborn grit.
  • Outlet audit: Confirm 3 in line is clear and joints remain watertight.
Adding an end cap to the NDS 3 in. Pro Series Channel Drain
End caps, outlets, and clips simplify clean terminations

FAQs

Can the 3 in. Pro Series handle vehicles?

Yes. Plastic grates are vehicle-capable for cars and light trucks at moderate speeds (≈up to ~175 psi). Choose appropriate grate style for your load.

How do I connect to pipe?

Use the built-in bottom knock-out to connect directly to 3 in sewer & drain pipe—fast and straightforward.

Can I create custom lengths?

Absolutely. Each section can be cut in 4 in increments to fit columns, steps, or curves (via segmented runs).

Spec Snapshot

  • Module Length: 3.28 ft snap-together sections
  • Cutting: Trim in 4 in increments for custom fits
  • Outlet: Built-in bottom knock-out to 3 in pipe
  • Construction: UV-stable walls with reinforcing ribs
  • Anchoring: Channel-to-channel clips + rebar clips
  • Grates: Vehicle-capable plastic options (cars/light trucks)
  • Applications: Driveways, paved patios, walkways
Get a Quote