Skip to content

SRW Adhesives

SRW offers a wide range of adhesives for many applications. Due to state and local VOC regulations our selection of available adhesive differs depending on the state in which you are located.

Select Your State to View Selection of Available SRW Adhesives

SRW Adhesive

Alabama   
Alaska   
Arizona   
Arkansas   
Colorado   
Florida   
Georgia   
Hawaii  
Idaho  
Iowa   
Kansas   
Kentucky   
Louisiana   
Minnesota   
Mississippi   
Missouri   
Montana   
Nebraska   
Nevada   
New Mexico   
North Carolina   
North Dakota   
Oklahoma  
Oregon   
South Carolina   
South Dakota   
Tennessee   
Texas   
Washington   
West Virginia   
Wisconsin   
Wyoming

California
Connecticut
Delaware
District of Columbia
Illinois
Indiana
Maine
Maryland
Massachusetts
Michigan
New Hampshire
New Jersey
New York
Ohio
Pennsylvania
Rhode Island
Utah
Virginia
Vermont

SRW - The Perfect Choice For a Wide Range of Landscape & Hardscape Projects

SRW adhesives are designed to make landscape and hardscape projects easier and are formulated for longstanding durability. The diverse line of adhesives in a wide range of different projects and applications including natural stone, retaining walls, and veneers. If you want to create a beautiful, long-lasting landscape, look no further than SRW adhesives.

SRW Adhesives half arc vertical lock

Vertical Hardscape Applications

Using the latest adhesive technology for vertical hardscape projects, you can immediately lock stone, veneer, and other materials where you need them in less than 5 seconds! Its strong-holding components will not slip or sag and will not require mortar and bracing. SRW adhesives are perfectly safe for both inside and outside repairs and other projects.

How To Use Vertical Instant Lock Quickly & Easily

Remove and clean all debris from the surface that could interfere with good adhesion including dust, dirt, loose particles, or materials. The surface must be clean, completely dry, and temperatures above 40°F (4.5°C).

Just cut across the tube's nozzle base, puncture the inner foil, and screw on the v-notch applicator tip which is included.

Using the SRW Premium Caulking Gun, apply the minimum 14:1 thrust ratio. At a 90° angle, v-notch up apply to one of the surfaces in a continuous head spanning across the full width, staying 1.27 cm or 1/2-inch from the outside edge.  You might need to apply additional beads but be sure to separate the beads by 3.81 cm or 1-1/2-inches. Do Not Apply in a dot design.

Press the surfaces together using a twisting motion then hold in place for 5 seconds.

Recommended Tips

Apply the adhesive in a horizontal arch design to prevent trapping any moisture.

If adhering to heavy materials permanently, you will probably need to apply for added support.

Make sure the substrate can support the weight.  In order to determine the recommended amount of linear inches, or cm, of adhesive, multiply the weight in lbs - (kg) by 2.33 (13.05).

Please Note – This is not intended for suspended or overhead applications, direct contact with flames, fire-brick, plastic, rubber, or asphalt. Do not use around pools or chlorides. Not for use for submersion or below the waterline.

Storage

The shelf life is 12 months using recommended storage. When storing, place in a cool, dry place and out of direct sunlight. Keep it away from freezing temperatures as it will become damaged.  Avoid temperatures above 120°F (48°C).

Clean-Up & Disposal

Use mineral spirits to clean up uncured adhesives.  Dispose of the contents and container by the specifications set by your local regional, national, and international regulationsFor easy removal, temperatures should read between 60-90°F (16-33°C).  At temperatures above 90°F (33°C), apply additional supports for 24 hours.

SRW Rapid Set Adhesive retaining wall
Stone Siding Adhesive Fireplace SRW

SRW Adhesives Applications

  • Natural Stone
  • Manufactured Stone
  • Brick, Block, and Pavers
  • Glass and Ceramic Tiles
  • Veneers
  • Indoor and Outdoor
  • Dry Stack
  • Masonry
  • Outdoor Kitchen Areas
  • Metal and Wood

SRW Rapid-Set Polyurethane Adhesive

Designed for construction and landscaping projects. A fast, permanent bond for almost any material including non-porous substrates.

The Benefits of SRW Adhesives

  • The set-up time is the best on the market
  • Specifically designed for construction and landscape projects
  • For both dry and damp surfaces
  • Compatible with high temperatures
  • For interior and exterior applications
  • Excellent, long-lasting strength
  • 12-month shelf life

Adhesive Application Chart

SRW Adhesive Application Chart

SRW Adhesive

Vertical Instant Lock Adhesive