Questions?
(800) 604-5537
Erosion Control / Ground Stabilization
Woven Stabilization Fabric
Standard-grade woven geotextile for driveways, roadbase, and subgrade separation — high tensile strength in full and cut rolls. Free shipping.
Standard-grade woven geotextile fabric is a high-strength ground stabilization layer for driveways, roads, and construction pads. It separates subgrade soil from aggregate and spreads load — keeping base rock from sinking into soft ground while letting water pass through.
What woven stabilization fabric does
01
Separates soil & stone
Placed between subgrade and aggregate, it stops base rock from punching down into soft soil — so your gravel stays where you put it instead of disappearing into the mud.
02
Spreads the load
High tensile strength distributes wheel and axle loads across a wider area, reducing rutting and extending the life of driveways, haul roads, and construction pads.
03
Lets water through
The woven weave is permeable — water drains through while soil particles stay separated, keeping the base course stable in wet and freeze-thaw conditions.
Woven vs. nonwoven geotextile
Both are geotextiles, but they solve different problems. Picking the wrong one is the most common — and most expensive — mistake on a stabilization job.
- Woven geotextile — high strength, low elongation. Built for stabilization and separation: driveways, roadbase, subgrade under aggregate, and heavy-load pads. This is that product.
- Nonwoven geotextile — high flow, high elongation. Built for drainage and filtration: French drains, edge drains, and behind retaining walls.
Rule of thumb: if the job is about load support and keeping stone out of dirt, reach for woven. If it's about moving water, reach for nonwoven.
Where standard-grade woven fabric is used
Standard grade covers the majority of light-to-moderate load stabilization work. Common applications:
Gravel driveways
Lay under new stone to stop pumping and rutting, and keep a gravel driveway from sinking into clay or soft soil.
Access & haul roads
Stabilize temporary and permanent roadbase over weak subgrade so the surface carries traffic without failing.
Construction pads
Create a firm working platform for equipment and staging on graded but unstable ground.
Parking & laydown areas
Separate aggregate from subgrade under lots and yards to reduce maintenance and re-grading.
Roll sizes in this collection
Standard-grade woven fabric is stocked in full rolls and pre-cut lengths so you can match the roll to the job without paying for coverage you won't use.
| Roll size | Approx. coverage | Best for |
|---|---|---|
| 12.5' × 432' | ~5,400 sq ft | Large driveways & roadbase runs |
| 15' × 360' | ~5,400 sq ft | Wide roads & pads |
| 17.5' × 309' | ~5,400 sq ft | Widest single-pass coverage |
| 17.5' × 103' | ~1,800 sq ft | Mid-size jobs |
| 12.5' × 108' | ~1,350 sq ft | Standard driveways |
| 12.5' × 54' & 27' | ~675 / 340 sq ft | Small repairs & patches |
Also stocked: 6" landscape staples for anchoring fabric before backfill. Need a heavier-duty option? See intermediate-grade woven fabric.
Woven fabric FAQ
What is woven geotextile fabric used for?
Woven geotextile fabric is used for ground stabilization and soil separation — most often under driveways, roads, and construction pads. It keeps aggregate from mixing into subgrade soil and spreads load to prevent rutting, while still letting water drain through.
What's the difference between woven and nonwoven geotextile fabric?
Woven fabric is high-strength and low-stretch, made for stabilization and separation under load. Nonwoven fabric is high-flow and stretchier, made for drainage and filtration. Use woven for driveways, roadbase, and load support; use nonwoven for French drains and behind retaining walls.
Does woven geotextile fabric let water through?
Yes. The woven structure is permeable, so water passes through while the fabric holds soil and aggregate apart. It drains more slowly than nonwoven fabric, which is why woven is chosen for load support rather than primary drainage.
Is woven geotextile the same as landscape fabric?
No. Lightweight landscape fabric is designed for weed control in garden beds. Woven stabilization geotextile is a structural, high-tensile material engineered to carry load and separate soil layers under gravel, roads, and pads — a much stronger, heavier product.
What fabric goes under a gravel driveway?
For most driveways, a standard-grade woven geotextile is the right choice. It's laid over the prepared subgrade before the base stone so the gravel doesn't sink or pump into soft soil. For very weak or wet subgrade, step up to intermediate grade.
How do I choose the right roll size?
Match roll width to your work area to minimize seams, then pick a length that covers your square footage with some overlap. The reference table above lists coverage for each stocked size; overlap adjoining runs by 12–24 inches on stable ground and more on soft soil.
Not sure which grade you need?
Match woven fabric to your soil, load, and roll size — or step up to intermediate grade for weaker subgrade.