Watts Components

This 1 by 1 inch lead free dual check valve backflow preventer helps prevent the reverse flow of polluted water from entering into the dri...

This 1/2 IN multi-orifice flow control valve is designed to limit the flow of water to equipment in tankless water heater installations an...

This 1/2 inch steam radiator valve is used as a shutoff valve in steam or hydronic heating systems. It features a bronze body and angle pa...

This 3/4 inch 2-piece full port lead free bronze ball valve with stainless steel ball and stem and solder end connections is used in comme...

This 3/4 inch 2-piece full port lead free bronze ball valve with stainless steel ball and stem and NPT threaded end connections is used in...

This 1/2 by 1/2 inch lead free dual check valve backflow preventer helps prevent the reverse flow of polluted water from entering into the...

This repair kit includes parts needed to repair a 1/2 inch lead free water pressure reducing valve that is designed to reduce the incoming...

This 1/2 inch 2-piece full port lead free ball valve is used in residential and commercial applications for a full range of liquids and ga...

This 10 inch lead free frost proof automatic draining wall hydrant is used in commercial and residential applications to provide freeze pr...

This 1 inch steam radiator valve is used as a shutoff valve in steam or hydronic heating systems. It features a brass body and angle patte...

This 1 1/4 inch isolation pump is designed to facilitate circulator pump replacement or repairs while the integral purge port facilitates ...

This 1 1/4 inch isolation pump is designed to facilitate circulator pump replacement or repairs while the integral purge port facilitates ...

This cover repair kit is used to repair or replace the cover on a 1/2 and 3/4 inch lead free double check valve assembly used to protect d...

This 8 inch lead free frost proof automatic draining wall hydrant is used in commercial and residential applications to provide freeze pro...

This 5 inch copper float is used with a float valve in a control assembly that provides make up water for pressure washers, cooling towers...

This 3/4 by 3/4 IN lead free dual check valve backflow preventer helps prevent the reverse flow of polluted water from entering into the d...

This 3/4 inch lead free two-piece, full port, ball valve with female threaded end connections is used in commercial and industrial backflo...

This stainless steel test cock accessories kit is used with backflow preventers or an isolation valve for gauges or small equipment lines....

This 1/8 inch lead free V-pattern strainer is designed to protect system components from dirt, rust, and other damaging debris in the pipi...

This 3/4 IN universal rubber repair kit, for series 007, is used to prevent the backflow of contaminated water into the potable water supp...

This 1/2 inch hot water angle valve is used in heating applications for gravity hot water heating systems only. It feature a bronze disc, ...

This 3/4 inch lead free hose connection vacuum breaker backflow preventer is designed to prevent the flow of contaminated water back into ...

This relief valve rubber parts repair kit provides all the parts necessary to repair the relief valve on a 1 1/4 to 1 1/2 inch lead free b...

This 1 inch PIPFM1-Press is a full port purge isolation pump valve which features a swivel flange and press end connections. This flanges ...

This combination pressure and temperature gauge, series DPTG-3, is used in commercial, residential, and institutional HVAC applications. I...

This 1 1/4 through 2 IN 800M4 bonnet assembly repair kit provides all the parts necessary to replace the bonnet of the applicable pressure...

This total rubber parts kit is used for replacing or repairing the relief valve assembly on a 3/4 and 1 inch lead free reduced pressure zo...

This stem extension kit is made to fit the 2 1/2 inch 3C/3CM1/G2 ball valves. This extension allows the valve to operate with up to 2 inch...

This stem extension kit is made to fit the 4 inch 3C/3CM1/G2 ball valves. This extension allows the valve to operate with up to 2 inches o...

This non-potable water expansion tank is designed for use in commercial and residential closed loop hydronic heating system piping to cont...

This repair kit includes parts needed to repair a 1/2 to 1 inch tempering valve uses a double throttling design to control both the hot an...

This repair kit includes parts needed to repair a 1/2 to 1 inch tempering valve that uses a double throttling design to control both the h...

This 10 inch gate valve repair kit provides all the parts necessary to replace or repair the packing gland for the applicable gate valve a...

This 1/2 inch lead free vacuum relief valve is suitable for low pressure steam and water service, and is ideal for use in domestic water h...

This handle kit includes the parts necessary to repair or replace the handle for a 2 1/2 inch NRS resilient wedge flanged gate valve, whic...

This handle kit includes the parts necessary to repair or replace the handle for a 3 inch NRS resilient wedge flanged gate valve, which is...

This 3/4 inch hose connection vacuum breaker backflow preventer permits the attachment of portable hoses to hose thread faucets and preven...

This 3/4 inch water pressure reducing valve is designed to reduce incoming water pressure to protect plumbing systems and reduce water con...

This 1/4 inch lead free V-pattern strainer is designed to protect system components from dirt, rust, and other damaging debris in the pipi...

This 3/4 x 3/4 inch lead free angle meter valve is used in light commercial and residential applications for incoming water supply service...

This kit includes parts necessary to repair a 1 inch flow check, series 2000M5. It contains bonnet disc assembly, gasket and o-ring. Feat...

This factory replacement relieve valve seat kit can be used on Watts series 909, LF909, and 909SV. This kit includes seat, seat O-ring, tw...

This quarter turn ball valve is used as a shutoff valve for oil tanks to stop the flow of oil in the oil line. It features a brass body, a...

The leak sensor, model A2-LS, is used in conjunction with the IntelliFlow® A2C-M1 or A2C-WB-M1 automatic washing machine water shutoff va...

This sill cock faucet with separate vacuum breaker is used in residential applications to permit the attachment of portable hoses to hose ...

This 1/4 inch lead free two-piece full port diverter ball valve with threaded end connections is used in commercial and industrial applica...

This 3/8 inch lead free two-piece full port diverter ball valve with threaded end connections is used in commercial and industrial applica...